Camera Compatibility
Compatible with GoPro HERO4, HERO3+, HERO3, and other models with similar dimensions. There is also enough room to accommodate an attached GoPro LCD BacPac.
Flexible Mounting Options
Two 1/4"-20 threaded holes lets you mount the camera horizontally or vertically. It can also be used with any accessory that has a standard GoPro three-prong mount or GoPro quick-release interface using an included adapter and quick-release buckle.
Operating Modes
Pan Following Mode: Locks tilt and roll axes. Camera smoothly pans to follow the direction of the handle.
Pan and Tilt Following Mode: Locks roll axis. Camera smoothly follows the pan and tilt motion of the handle.
Lock Mode: Locks the pan, tilt, and roll axes of the camera in the position it is in when mode is activated.
Inverted Mode: Allows you to turn the gimbal upside-down. This mode is an inverted version of the Pan Following Mode.
Manual Pulling Locking: After the gimbal has been powered on for eight seconds, the tilt angle can be adjusted manually in the Pan Follow Mode and the Lock Mode. Adjust the title angle to the desired position and wait for 0.5 second until the gimbal registers the new angle.
Camera Orientation Detection System
No matter how your camera is mounted (left-aligned or right-aligned, upright or inverted), the Feiyu WG will identify the mounting position and automatically make the appropriate adjustments to its configuration.
Single-Button Operation
A single button is used to turn the gimbal on/off and switch between operating modes.
Video and Camera Charging Interface
Using an included cable, you can connect the GoPro to the WG's video and camera charging interface port, allowing you power the camera from the gimbal batteries, as well as receive an analog video signal from the GoPro. This signal is output via the micro-USB port for sending to an optional external monitor.
Compatible with Optional Remote Control
An optional remote control is available that enables pan, tilt, and roll angle adjustment, as well as other calibration settings. For manual tilt adjustment, simply hold the camera in the desired position for about half a second to register the setting.
Additional Features
- Weighs only 6.6 ounces
- Powered using two 900mAh 16340 type batteries (four batteries included)
