top of page

PRODUCT HIGHLIGHTS

- Power camera with external power supply
- With same shape and interface as original battery

 

How to choose dummy battery pack.

You will find that original battery power is not enough when you have a long time shooting. How to solve this problem? LanParte have the dummy battery pack for many type camera batteries, such as Canon LP-E6, Sony NP-FW50, Panasonic DMW-BLF19GK and Nikon EN-EL15. You can use the dummy battery pack connect with a bigger battery to power your camera.

 

LanParte have two type power solutions for the camera with battery dummy pack.

One is V-Mount Li-Ion Battery VB-150 with LanParte V-Mount Battery Pinch VBP-01, this solution is with 10100mAh capacity which can power for very long time especially for time-lapse shooting or more accessories like monitor or lights etc..

 

Another one is the portable battery PB-600. With 6000mAh capacity which as 4pcs original battery’s capacity . Also it’s portable enough which you can put it to your pocket. 

 

FAQ

Q. What’s the camera dummy battery pack?

A. Cmera dummy battery pack is the adaptor comes with the same outlines and interface as the original battery which can power the camera with external power source.

 

Q. Is the dummy battery pack chargeable?

A. The dummy battery pack is the adaptor which is without cell inside, so it’s un-chargeable.

 

Q. How to choose dummy battery pack?

A. Please check the dummy battery list to find the original battery model and camera model. 

 

Q. Why need to use the dummy battery pack?

A. The camera original battery is with the limited capacity. You can power camera long time with the dummy battery pack by connecting a external power source especially for the time-lapse shooting.

 

Q. What’s the input voltage for the dummy battery?

A. The input voltage is from 7.4V-8.4V. Please don’t have the input higher than 8.4V because the dummy battery can’t reduct voltage. Or it may damage your camera. 

 

Q. The camera original battery is marked with 7.2V or 7.4V. Why the dummy battery can have the input of 8.4V?

A. 7.2V or 7.4V camera battery is with two pcs 18350 battery cell or similar battery cell. It’s full charged battery voltage is 8.4V. So 8.4V is the safety.

 

Q. Is the dummy battery safe for my camera?

A. Yes. The dummy battery pack is a adaptor which don’t change voltage. It’s is safe when you have the input voltage from 7.4V-8.4V.

 

Q. What’s the size for the dummy battery interface?

A. LanParte dummy battery is with the interface of 55-21mm which with the Internal positive and negative elect rodes.

 

Q. What’s the full decoded dummy battery. 

A. The full decoded dummy battery comes with the full decoded chip which can let camera consider the dummy battery to the original battery. Then the camera can work normally. 

 

Q. Is the cable on dummy battery impact camera. 

A. Every camera come with the hole to let the cable out. The cable will not impact camera. 

 

Q. Why I can’t turn on the camera when I connect the dummy battery. 

A. Please follow the step below and contact your seller if it still can’t work. 

1. Please confirm you use the correct dummy battery.

2. Please confirm the battery you connect is alive.

3. Please confirm the camera battery door is closed.

LanParte BLF19P-D D-Tap to BLF19 Dummy Battery

S$89.90Price
  • Strictly Non-Refundable nor Exchangable
    Please Proceed to the Store During Opening Hours for Purchase or Enquiries.

  • While Stock Last.

bottom of page